Showing posts with label cable. Show all posts
Showing posts with label cable. Show all posts

Thursday, October 3, 2013

Cable Analyser

Many constructors have various cables lying around and after a time do not know any longer what they are for or what their pin connections are. It is not always possible to check this with a multimeter. The analyzer may be of help in such a situation. In most cases, an analyser for checking cables with D9 and D25 connectors will suffice. The shape of the analyser will depend to a large extent on the type of cable to be checked. It may be made as a connector, as a bus, or as a feed-through cable. Since only standard components are needed, the cost is low.

Cable Analyser Circuit DiagramSolder a resistor of 1 kΩ between pin 1 of the analyser and the case; one of 2 kΩ between pin 2 and the case, and so on, increasing the value of the resistor by 1 kΩ for each successive pin. When this is completed, connect the analyser to the cable to be tested and measure the resistance between pin 1 and the case. The value so obtained in kilohms is the number of the pin at the other end of the cable. The arrangement is shown in the diagram. If at all possible, use resistors in the E96 series, since these give best accuracy.

Cable Analyser Circuit DiagramSince this design was completed, a reader has suggested a simple improvement to it, whereby the nine resistors are linked in series instead of in parallel. The great advantage of this simplification is that all nine resistors have the same value: 1 Ω or 1 kΩ. The test method remains the same: the value in Ω or kΩ measured on the multimeter is the nuber of the pin at the other end of the cable.
Read More..

Friday, May 31, 2013

Cable Crossed Cables Note Crossed Wiring

Rj45 Wiring Diagram on Rj45 Wiring 568b
Rj45 Wiring 568b.


Rj45 Wiring Diagram on We Use Red Cable For Crossed Cables Note  All Our Crossed Wiring Is
We Use Red Cable For Crossed Cables Note All Our Crossed Wiring Is.


Rj45 Wiring Diagram on Rj45 Cat6 Wiring Diagram Submited Images Pic 2 Fly
Rj45 Cat6 Wiring Diagram Submited Images Pic 2 Fly.


Rj45 Wiring Diagram on Wiring Diagrams
Wiring Diagrams.


Rj45 Wiring Diagram on Cat5 Socket Wiring Diagram   Reviews And Photos
Cat5 Socket Wiring Diagram Reviews And Photos.


Rj45 Wiring Diagram on How To Make A Rj45 Cable Tester    Rj45 Jack
How To Make A Rj45 Cable Tester Rj45 Jack.


Rj45 Wiring Diagram on Rj45 Wiring Diagram
Rj45 Wiring Diagram.


Rj45 Wiring Diagram on Welcome To Tutor Piggy Blogspot Com  Rj45 Wiring Diagram
Welcome To Tutor Piggy Blogspot Com Rj45 Wiring Diagram.


Rj45 Wiring Diagram on Diagram Of How Rj45 Socket Wiring Shouild Be Terminated Wiring Diagram
Diagram Of How Rj45 Socket Wiring Shouild Be Terminated Wiring Diagram.


Rj45 Wiring Diagram on Order Of The Bath    Churchtech
Order Of The Bath Churchtech.


Read More..

Thursday, April 4, 2013

Ethernet Cable Standards Assignments

Wiring Diagram on The Compass Derose Guide To Ethernet Computer Network Wiring
The Compass Derose Guide To Ethernet Computer Network Wiring.


Wiring Diagram on Cat 5e 6 Wiring Diagram
Cat 5e 6 Wiring Diagram.


Wiring Diagram on Cat 5 Wiring
Cat 5 Wiring.


Wiring Diagram on Arctic Cat Snowmobile Z570 Carburetor Schematic Diagram   Circuit
Arctic Cat Snowmobile Z570 Carburetor Schematic Diagram Circuit.


Wiring Diagram on How To Guide  Creating Cat 5 Utp Ethernet Crossover Cable   How To
How To Guide Creating Cat 5 Utp Ethernet Crossover Cable How To.


Wiring Diagram on Cat 5 Ethernet Cable Standards   Pin Out Assignments
Cat 5 Ethernet Cable Standards Pin Out Assignments.


Wiring Diagram on How To  Wire An Ethernet And Phone Jack Using A Single Cat5e Cable
How To Wire An Ethernet And Phone Jack Using A Single Cat5e Cable.


Wiring Diagram on Cat 5e Wall Outlet Showing The Two Wiring Schemes  A For T568a   B
Cat 5e Wall Outlet Showing The Two Wiring Schemes A For T568a B.


Wiring Diagram on Ethernet 10   100 Mbit  Cat 5  Network Cable Wiring Pinout And
Ethernet 10 100 Mbit Cat 5 Network Cable Wiring Pinout And.


Wiring Diagram on Cat5e Wiring
Cat5e Wiring.


Read More..

USB cable signals

USB cable consists of 4 wires plus a conductor wire wrapping, such as the protectors are usually found in the audio cable. Cable number 1 is used to channel resources to the voltage of 5 volts, if necessary USB devices may draw power from this line and should not exceed 100 mA. Computer equipped with USB capability, is required to provide power at 100 mA for this purpose. USB devices that require more power than the aforementioned provisions, must provide their own resources for the purposes work equipment.


The USB cable signals
The USB cable signals

Number 4 is the ground cable as a back channel source voltage of 5 volts. Cable number 2 and number 3 is used for signal transmission. No. 2 cable and cable called D-3 numbers called D, the voltage on the two channels is changed between 0 Volt and 3.3 Volt. Digital signal is sent through the two channels are said to be difference signal, which means that the signal digital 0 or 1 is not declared to the magnitude of the voltage on the channel to the ground, as well as digital signals used in the IC TTL (transistor Transitor Logic) or the RS232 channel.

Digital signal is expressed by the voltage difference between the two cables. If the voltage on the D channel is higher than the voltage at D-channel, then the information transmitted digital signal is 1 , otherwise the digital signal 0 is expressed by the voltage at D <voltage at D-. To distinguish the speed of data transmission, the channel USB devices attached to the 3.3 Volt prisoners in different ways, as shown in Fig.

At low speed USB devices, the D-channel to 3.3 Volt dipasangan custody, or in the absence of information transmission, the channel is in state 0 . For full speed USB device, such resistance is connected to the D channel, so that in the absence of data transmission channels are in state 1 .
Read More..