Build a Low Ripple Power Supply Circuit Diagram

How to build a low ripple power supply circuit diagram. This simple low ripple power supply circuit diagram may be used where a high current is required with a low ripple voltage (such as in a high powered class AB amplifier when high quality reproduction is necessary) , Ql, Q2, and R2 may be regarded as a power darlington transistor.

ZDl and Rl provide a reference voltage at the base of Ql. ZDl should be chosen thus: ZDl = Von-1. C2 can be chosen for the degree of smoothness as its value is effectively multiplied by the combined gains of Q1/Q2, if 100 µF is chosen for C2, assuming minimum hfe for Ql and Q2, C = 100 x 15(Q1) x 25(Q2) = 37,000 µf.

Low Ripple Power Supply Circuit Diagram

Read More..

Build a Isolated 15V To 2500V Power Supply Circuit Diagram

Build a Isolated 15V To 2500V Power Supply Circuit Diagram. A dc-dc converter using a 74HC04 drives Tl. Tl is a ferrite-core transformer using a Fair-Rite, Inc. P/N 5975000201 (uo + 5000) and has a 7-turn primary and a 25-turn secondary. Kynar, #30 wirewrap wire is used. With Tl, the circuit isolation is good to 2500 V.

Isolated 15V To 2500V Power Supply Circuit Diagram

Read More..

Build a 2M 6M Transverter Circuit Diagram

Using the bilateral properties of a balanced mixer this transvertcr will produce 6-m output with 2-m inputs. Y1 is a 90-MHz crystal. Note that the input on 2 m is 143 to 144 MHz for 53 to 54-MHz output. This avoids possibility of extraneous 2-m reception during receive periods. If your radio will not transmit below 144 MHz, then use a 93- or 94-MHz crystal frequency.

2M 6M Transverter Circuit Diagram

Build a 2M 6M Transverter Circuit Diagram

Read More..

Build a Long Line Ir Drop Voltage Recovery Circuit Diagram

How to Build a Long Line Ir Drop Voltage Recovery Circuit Diagram? This Simple Long Line Ir Drop Voltage Recovery Circuit Diagram provides a unique solution to a common system-level power distribution problem: When the supply voltage to a remote board must traverse a long cable, the voltage at the end of the line sometimes drops to unacceptable levels. 

This + 5-V/ + 5-V converter addresses this by taking the reduced voltage at the end of the supply line and boosting it back to + 5 V. This can be especially useful in remote display devices, such as some point-of-sale (POS) terminals, where several meters of cable could separate the terminal from the readout.

Long Line Ir Drop Voltage Recovery Circuit Diagram

Read More..