subwoffer wiring diagram

Wednesday, September 11, 2013

Use Of Alignment Tools and Dial Indicators Thomas Coupling

Tuesday, September 10, 2013

50W DC DC Converters TRACOPOWER with the Highest Power Density

TRACOPOWER launches the high performance TEN50 Series with 12 models providing 50W power in a 1”x 2”x 0.4 “ compact package. Today already almost all of applications require a high efficiency of a voltage conversion. When we add to this requirement also saving of space and a galvanic isolation, we´ll get to widely used components – DC/DC modules. The TEN 50 Series models feature a very high efficiency of up to 92%. Excellent efficiency is maintained in over a wide load range and no minimum load is required for an accurate output regulation. They are available in three basic groups – TEN 50-12xx, TEN 50-24xx a TEN 50-48xx with a wide input voltage range (2:1).

Low thermal losses and the use of highest grade components allow an operating temperature range of –40°C to +85°C while up to 55°C no forced air cooling is required. With an optional heat-sink this temperature can even be increased. An operation without a forced air cooling is possible even at higher temperatures – at an adequate power derating ( 2%/K above 55°C and 2,5%/K above 65°C). The TEN 50 Series comes with remote On/Off function and have an adjustable output voltage (± 10%). Protection against overload and short-circuit, very compact dimensions and a 1500VDC isolation enable usage of TEN 50 modules in virtually any power application.

Simple Telephone In Use Indicator Circuit Diagram

This is a Simple Telephone In Use Indicator Circuit Diagram. With this circuit mounted in or near every phone in the house, it will allow users to know if the phone is being used and not to pick up the phone. When a phone is taken off hook, the voltage across the tip and ring terminals drops to 10 volts or less. This will cause the FET (2N4360) to turn on and also turn on the transistor (2N2222). When the transistor turns on it will allow current to flow through the LED and make it light. A blinking LED could be used to make the effect better.

Simple Telephone In Use Indicator Circuit Diagram

Power Turbine Speed Magnetic Pickups and Optional Vivration Velocity Transducer

Circuit Design of a Photoflash Unit

A photoflash unit has a simple circuit design: a high-voltage direct current (DC) supply is connected in series with a high-resistance resistor (which we’ll call ‘R1′). This resistor limits the current flow. A capacitor ‘C’ is connected in parallel with a flash lamp. The resistance ‘R2’ of a flash lamp is of small value. The circuit contains a switch between the large resistance ‘R1’ and a small resistance flash lamp ‘R2’, such that it can connect either resistance at any time during the process.

Thursday, September 5, 2013

Mini Metronome

Linear scale-Small size 40 to 208 beats per minute

Mini Metronome Circuit diagram:

Notes:

Q1 & Q2 provide linear frequency operation of IC1 following P1 resistance variation.
Q3 was added in order to obtain a louder click, similar to clockwork metronomes.
12V micro battery was used to obtain more output power and more compactness.
Rotate P1 fully towards R2, then set R1 to obtain 40 beats per minute (compare with another metronome).
Rotate P1 fully towards R3, then set R4 to obtain 208 beats per minute.
Finally mark the entire scale with the usual metronome steps as following:
40 - 42 - 44 - 46 - 48 - 50 - 52 - 54 - 58 - 60 - 63 - 66 - 69 - 72 - 76 - 80 - 84 - 88 - 92 - 96 - 100 - 104 - 108 - 112 - 116 - 120 - 126 - 132 - 138 - 144 - 152 - 160 - 168 - 176 - 184 - 192 - 200 - 208.

Parts:

P1______100K   Linear Potentiometer
R1_______10K   1/2W Trimmer Cermet
R2_______10K   1/4W Resistor
R3______330K   1/4W Resistor
R4_______50K   1/2W Trimmer Cermet
R5______100K   1/4W Resistor
R6,R7_____1K   1/4W Resistor
C1________1µF   63V Polyester Capacitor
C2_______10nF   63V Polyester Capacitor
C3_______47µF   25V Electrolytic Capacitor
IC1_____NE555   General purpose timer IC
Q1,Q2___BC560   45V 100mA Low noise High gain PNP Transistors
Q3_____ZTX753   100V 2A PNP Transistor
SW1______SPST Switch (Ganged with P1)
SPK______8 Ohm 40mm. Loudspeaker
B1_____12V Battery (MN21, GP23A or VR22 type)

Audio Amplifier Using TDA1519

This audio amplifier circuit is based on the TDA1519 amplifier ic which can be used in audio applications which don’t need high output power .The TDA1519 circuit can deliver 2x6 watts output power .

Audio Amplifier Circuit Using TDA1519

TDA1519 is an integrated class-B dual output amplifier in a 9-lead single in-line (SIL) plastic medium power package is primarily developed for car radio applications.This amplifier electronic circuit project needs to be powered from a 14.4 volt DC power supply